SERVICE MENU

Inspect all fluid levels and condition. Check belts and hoses. Lube door and hood hinges, lube steering, suspension and driveline. Includes up to 5 quarts of motor oil and new ACDelco oil filter.

Performance test system. Inspect system for leaks. Check drive belt condition and tension. Check hoses and belts for deterioration. Refrigerant extra.

Drain and refill the transmission/transaxle with approved fluid. Install filter and gasket. Check transmission/transaxle operation.

Install pads, inspect rotors, check calipers and master cylinder fluid levels.

Scan and diagnose engine codes with our GM technology.

Mount and balance of four tires and rims. Relearn tire pressure monitor system (TPMS). Wheel alignments are recommended with purchase of new tires to prevent future tire wear.

(2 wheel and 4 wheel)

Check and adjust caster, camber and set toe. Check tire pressure and wear. Check all steering and suspension. Additional parts and labor may be required on some vehicles.

Multi-point inspection including: Road test by GM certified technician - brake lining condition and brake components - steering components - suspension components - tire condition, wear patterns and tread depths - tire rotation (if required) - wiper blades - battery condition (voltage and cranking amperage test, cable and terminal inspection) - tire pressure monitor system (TPMS) relearn at extra cost if required. 

Replace the engine air filter.

Replace windshield. Processed through Autopac claim where we take care of the entire process and paper work for you!